User's Manual

AWP-PXA10 Fixed Wireless Phone
19 User Manual
Figure 25 Lock Keypad-3
6.2 Modify Keypad Locking Code
 Go to Settings menu, then choose “Security” sub-menu, from there, you will
find “Set K eypad Password” sub-m enu, once this m enu is selected, LCD
will show a password dialog. Just enter a new password for keypad locking:
Figure 26 Set Keypad Password-1
 After a new password is entered, a password confirm ation dialog will be
displayed. Re-enter the new password you just entered:
Figure 27 Set Keypad Password-2
 If the re-entered password is the same as the one you enter for the first tim e,
the new password will be changed successfully.
7 Technical Specifications
Frequency： CDMA 800 MHZ
Maximum Transmitting Power： > 23 dBm @ 50 ohm
Receiving Sensibility： < -105dBm/1.23MHz;
External DC Voltage： DC 5.3 V
Operation Temperature： -10℃ ~ +45℃
Ambient Humidity： 0～95％
Storage Temperature： -30
o
C～＋60
o
C
Pressure： 86－106Kpa
8 Quick Troubleshooting Guide
 Moisture or ventilation problems: Visually inspect the Phone body, moisture
can damage the Phone. Ventilation is also very important. M ove the Phone
to improve the ventilation as necessary.
 No power: Verify that AC powe r source and its corresponding circuit
breaker are functioning properly.
 Unable to receive incoming calls:
1. Make sure that the incoming call is not restricted;
Enter Password
****
Confirm Password
****