User's Manual

AWP-PXA10 Fixed Wireless Phone
18 User Manual
Figure 22 Phone Info
8. Management
Enter password: 764200
Set the delay time manually when begin to charge the bill.
9. Port Speed
To set the port speed to 9600, 19200,57600, 115200 or 230400.
6 Keypad Locking
For better protection, the Phone provides you with Keypad locking feature.
You can lock your Phone’s Keypad if you do not want som eone else to access
your Phone while you are away from your Phone.
Once Phone’s Keypad is locked, P hone will not allow to m ake outgoing
calls or access other features, such as Contact, Recent Calls. But a locked Phone
will allow to accept in coming calls and notif y you for any incom ing short
messages. Unlock the Keypad before using the Phone.
6.1 Lock Keypad
 When the Phone is at idle state (Phone must be at idle state), firmly pressing
“CANCEL” Key for over 2 seconds, the Keypad will be locked, and a pop-
up window displayed as following:
Figure 23 Lock Keypad-1
 When any Key is pres sed while Keypad is locked, Phone will sho w a
password dialog. The default password for unlocking K eypad is: 0000.
(Note: In the case that you forgot your Keypad locking code, you will have
to ask your service provide to unlock your phone).
Figure 24 Lock Keypad-2
 Once Keypad is locked, at Idle state, “Key Guard Mode” message will be
displayed on LCD to indicate that the Keypad has been locked:
Key Locked.
Input Password to
unlock
Enter Password
Key Guard Mode
Menu Contacts