CDMA Cellular Fixed Wireless Phone User Manual (General Function) Model : PXA10 (Voice & SMS)
AWP-PXA10 Fixed Wireless Phone All Rights Reserved THIS PUBLICATION AND ITS CONTENTS ARE PROPIETARY TO Company name and location. NO PART OF THIS PUBLICATIONS MAY BE REPRODUCED IN WHOLE OR IN PART IN ANY FORM OR BY ANY MEANS, WITHOUT THE WRITTEN PERMISSION OF Company name and location.
AWP-PXA10 Fixed Wireless Phone Table of Contents 1 PHONE OVERVIEW............................................................................................6 2 BASIC FUNCTIONS.............................................................................................7 3 BASIC OPERATIONS..........................................................................................8 3.1 POWER ON/OFF.............................................................................................................
AWP-PXA10 Fixed Wireless Phone Introduction Congratulations on your purchase of the CDMA Fixed Wireless Phone (Hereinafter referred to as Phone). The Phone has been designed to operate with the latest digital communication technology Code Division Multiple Access (CDMA). The CDMA technology has many advanced features and provides excellent voice quality.
AWP-PXA10 Fixed Wireless Phone 5 z Do not use with car battery. It may lead to electric shock or damage to Phone. z Do no t t hrow battery. Batteri es are no t t o be d isposed off b y putting the m in fire. It may explode or catch fire. z Do not atte mpt to ch ange the security co des o r co mponents. User is responsible fo r an y consequences arising out of such attempt. z Avoid shock or impact. Rough handling can cause damage to the Phone body and internal circuits. z Do not paint.
AWP-PXA10 Fixed Wireless Phone 1 Phone Overview Figure 1 shows the Keypad layout of the Phone. 1. Left Key 2. Up Key 3. Down Key 4. Right Key 5. IN-USE LED 6. OK Key 7. CANCEL Key 8. MUTE Key 9. END Key 10. CALL/REDIAL Key 11. Speaker Key 12. CALL/REDIAL Key 13. Numerical Keys (0~9, * ,#) Figure 1 Keypad Layout Figure 2 shows the back side of the Phone. 1. R-UIM card slot 2. Battery chamber 3.
AWP-PXA10 Fixed Wireless Phone 2 Basic Functions The following table lists the basic functions supports.
AWP-PXA10 Fixed Wireless Phone 3 Basic Operations 3.1 Power On/Off 3.1.1 Power On Hook up handset to you r Phone and put the han dset to hang up position , then connect DC power suppl y to the “DC IN” port at th e rear of the Phone or insert the battery to the battery chamber. Switch the “Power” switch (on the rear of the Phone) to ON, your Phone should go to idle screen and is ready to use. 3.1.
AWP-PXA10 Fixed Wireless Phone 3.6 Metering Function The Phone support time and tariff unit m etering function. When the call is connecting, the screen will display the talk time and tariff unit . User can ask the local operator for the unit price of every ta riff unit. Once th e unit price is set in the Phone, then the Phone would calculate and display the cost of each phone call. 3.
AWP-PXA10 Fixed Wireless Phone 5 Phone Menu The idle scr een display s: rece ived CDMA signal str ength, batte ry leve l, Local date and tim e from CDM A network, your CDMA operator nam e, programmable banner, and som e other usef ul information: for exam ple, if you have unread SMS, the message icon would appear 5.1 Main Menu At the bottom of the display (see Figure 4), there is an area called soft Key area, in which there are two soft Keys : Menu and Contact.
AWP-PXA10 Fixed Wireless Phone 5.2 Contacts (Phonebook) Phonebook can be used to store cont act’s nam e and contact’s Phone numbers, address, em ail address and internet address. You can store up to 200 Phonebook entries to P hone memory. If your Phone supports R-UIM card, you can also store contacts to R-UIM card.
AWP-PXA10 Fixed Wireless Phone Figure 13 Phonebook: Group - 1 Figure 14 Phonebook: Group - 2 5) Erase All: U sing this m enu item, you can delete all Phonebook entries from Phone memory. or R-UIM card memory: Figure 15 Phonebook: Erase All 6) Speed Dial: This feature is used to s etup speed dial. You can add speed dial number, remove or remove all speed dial numbers. 7) Memory State: This m enu can display the memory usage of the Phone and R-UIM card. 5.
AWP-PXA10 Fixed Wireless Phone 3) Inbox: You can use this m enu item to view all of the m essages you have received. For each message, you can delete, reply and forward the messages. You can also store the sender’s Phone number and make a call to the sender. 4) Outbox: Outbox stores all of the m essages you have sent out so far. Each message inside the outbox, you can erase and forward. 5) Erase Messages: You can erase messages from Inbox, Outbox or erase All.
AWP-PXA10 Fixed Wireless Phone 3) Missed Calls: This m enu records all of the inco ming calls you m issed. For each missed call, the following information gets saved: the Phone number of the missed call, the time when the call arrived. 4) Erase Lists: You can erase incom ing calls, ou tgoing calls, m issed calls and erase all by using this menu: Figure 25 Recent calls: Menu-6 Figure 26 Recent calls: Menu-7 5) Call Sta t. ： This m enu stores s tatistic data for all in coming calls and outgoing calls.
AWP-PXA10 Fixed Wireless Phone Figure 32 Tools: Menu-6 5.6 Settings You can use Setting m enu to custom ize your Phone’s setup. The Setting menu is shown below: Figure 33 Setting: Menu-1 Figure 35 Setting: Menu-3 Figure 34 Setting: Menu-2 Figure 36 Setting: Menu-4 1. Sounds: Ringer: You can select your preferred ring tone. Volume: You can change the volum e of ring tone, Key press beep tone, handset receiver, hand-free speaker , handset m icrophone and hand-free microphone.
AWP-PXA10 Fixed Wireless Phone a) Use Password: Password for enter bill ing mode as Prepaid, Postpaid and Menu mode, Yes is for enable and No is for disable. b) Change CM PIN: Change the password for billing m ode as Prepaid and Postpaid. c) Change Master PIN: Change the password for Main menu from OK key. d) Bill Decim al Digit: Se t the dec imal digit nu mbers of billing ch arge showed.
AWP-PXA10 Fixed Wireless Phone c) Restrict Incom ing Call: You can en ter up to 10 phone num bers for restricted incoming calls. d) Restrict Outgoing Call: You can enter up to 10 phone num bers for restricted outgoing calls. e) Change Password: You can change your security password through this menu. Remember the password after changing it. f) Set Keypad Password: You can change your Keypad locking code. The default is 0000.
AWP-PXA10 Fixed Wireless Phone Figure 22 Phone Info 8. Management Enter password: 764200 Set the delay time manually when begin to charge the bill. 9. Port Speed To set the port speed to 9600, 19200,57600, 115200 or 230400. 6 Keypad Locking For better protection, the Phone provides you with Keypad locking feature. You can lock your Phone’s Keypad if you do not want som eone else to access your Phone while you are away from your Phone.
AWP-PXA10 Fixed Wireless Phone Figure 25 Lock Keypad-3 6.2 Modify Keypad Locking Code Go to Settings menu, then choose “Security” sub-menu, from there, you will find “Set K eypad Password” sub-m enu, once this m enu is selected, LCD will show a password dialog. Just enter a new password for keypad locking: Enter Password **** Figure 26 Set Keypad Password-1 After a new password is entered, a password confirm ation dialog will be displayed.
AWP-PXA10 Fixed Wireless Phone 20 2. Make sure that your Phone is having good signal reception Unable to make outgoing calls: 1. Make sure that the numbers you dialed are not restricted; 2. Make sure that your Phone is having good signal reception Unable to receive SMS: Make sure that your Phone’s m emory is not full for storing SMS. If the memory is full, please empty inbox. REMEMBER: you can always use “Load Default” sub-menu in “Security” menu to reset your Phone to its default setting.
AWP-PXA10 Fixed Wireless Phone 9 Statement for USB connection 21 This equipm ent has be en tested and found to com ply with the lim its for a Class B digital device, purs uant to p art 15 of th e FCC Rules. These lim its are designed to provide reasonable protection against harmful interference in a resid ential insta llation.
AWP-PXA10 Fixed Wireless Phone 10 SAR information SAR information The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types PXA10(FCC ID: PH7PXA10) has also been tested against this SAR limit.The highest SAR value reported under this standard when properly worn on the body is 0.406 W/kg.
