User's Manual

错误！未找到引用源。
6
CDMA FWP
PX
34
0
N
3.2.4 Display Icon
The following icon may appear on the display of the phone:
No. Icon Description
1
Current signal strength. The more bars there are, the stronger the signal is.
2
No signal.
3
Battery capacity indicator. The more bars there are, the more capacity the
battery has.
4
Supplied by charger
5
Alarm on
6
Mute
8
No UIM card
9
Unread message
10
Roaming
Figure 3 Display Icon
4 Basic Operations
4.1 Power On/Off
Connect DC power supply to the “DC IN” port or insert the battery to the battery chamber. Switch the
“Power” switch (on the underside of the Phone) to ON, then press the Power On/Off Key on the panel
for 3 seconds to power on the phone—if the DC power is in and the phone will power automatically,
your phone should go to standby screen and is ready to use.
You can turn the phone off directly by switching the “Power ON/OFF” switch (on the underside of the
phone) to OFF position. If the phone will not be used for long time, please turn this switch to OFF. Or
you can press the Power On/Off Key for 3 seconds to power off the phone.
4.2 Make a Call
While your phone is power on and at standby screen, enter a destination number you wish to call and
then press <Redial >Key. (Note: To modify digits you enter, you can press<CLEAR> Key to delete
wrong digits first and then enter new digits).
The phone also has a speaker. To use the speaker to make a call, press <SPEAKER> Key, enter a
phone number, and press <Redial> Key.
Or you can press <Contacts> key to enter contacts menu, <1 View>,<OK> Key to the contacts list,
press <Volume + -> to scroll to the desired contact, press <Redial >Key .Once the call is connected,
the phone’s screen will display the number you have dialed, and the time duration the call has lasted.
4.3 Answer a Call
When there is an incoming call, the phone will ring and display the phone number of the incoming call
(if the number is available). You can pick up the handset or press <SPEAKER> Key to answer the
incoming call. The ring tone and ring-tone volume can be changed in the setting menu.
4.4 End a Call
You can end a call by pressing <POWER>Key. If you are using the handset for a phone call, hanging
up the handset will end the call automatically.