User's Manual

错误！未找到引用源。
21
CDMA FWP
PX
34
0
N
10.6 Phone Info
You could check the phone information in this menu. The phone information includes Phone Number
(need you to input the number first), SW Version (Software Version)。
10.7 Port Speed
Please consult your operator for details on this function.
.
11 Data Service
Model PX3x0N can provide circuit data service (14.4 kbps) and high speed data service (up to 153.6
kbps, the actual speed depends on your CDMA service provider and the service you have purchased).
You can use the phone as a modem for your computer.
The user manual of this function please refers to the user manual in the CD disk for data service.
12 Technical Parameters
Dimensions 190(L> x130(W> x63(H> mm
Weight <1.0kg
Air Interface IS-95A/B, IS-2000
Vocodec 13K QCELP & 8K EVRC
Charger AC Input 90 ~ 240 VAC, 50~60Hz
Charger DC Output 5.3VDC @800mA
Backup Battery 3.6V/1500mAh Li-ON Rechargeable Battery
Operation Temperature -10℃~ 50℃
Range of Humidity 5% ~ 95% RH
13 Quick Troubleshooting Guide
 Unable to send/receive data/fax calls: Check the connections to computer and verify that
necessary software has been properly installed and configured.
 Moisture or ventilation problems: Visually inspect the phone body, moisture can damage the
phone. Ventilation is also very important. Move the phone to improve the ventilation as necessary.
 No power: Verify that AC power source and its corresponding circuit breaker are functioning
properly.
 If Phone can’t make data connection:
9 Make sure to follow modem installation procedures
9 Make sure that you have purchased CDMA1x service from your CDMA service provider
9 Make sure that both PC’s modem driver and proper software are installed correctly
 Unable to receive incoming calls:
9 Make sure that the incoming call is not restricted;
9 Make sure the FAX/DATA screen setting is OFF
9 Make sure that your Phone is having good signal reception
 Unable to make outgoing calls:
9 Make sure that the numbers you dialed are not restricted;
9 Make sure that your Phone is having good signal reception
 Unable to receive SMS: Make sure that your Phone’s memory is not full for storing SMS. If the
memory is full, please empty inbox.
 While charging the battery, DON’T disconnect the charger before the battery is fully charged.
REMEMBER: You can always use Load Default sub-menu in Security menu to restore all original
phone settings.