User's Manual

32
1. GREETING ▼
2. CHANGE CODE
MY Phon
_
MY Phone
FRI 10/10 1:24A
RESET PHONE
▶ YES
PHONE
INTIALIZATION
CHANGING GREETING MESSAGE
This feature lets you change the greeting message that the
phone displays during standby mode.
1. Press <MENU>, <6> (Configuration).
2. Press <2>(Getting). Current greeting displays.
3. Press <STORE> to change greeting.
4. Enter your new greeting message with alphanumeric keys
NOTE: Press <MESSAGE> to switch between capital and
lower case
Example) To enter “My Phone”
Press <MESSAGE>, <9>, <9>, <9>, <#>
<MESSAGE>, <7>, <MESSAGE>, <4>, <4>, <6>,
<6>, <6>, <6>, <6>, <3>, <3>.
5. Press <STORE> to save change.
SYSTEM RESET
To reset your phone settings to manufacture’s defaults, follow these steps:
1. Press <MENU>, <7> (Security).
2. Enter lock code.
NOTE: Lock code is set as 0000 from the factory.
To change lock code see page 29.
3. Press <7> (Factory Reset).
4. Select “YES” by pressing <Volume key> (or <*>, <#>).
5. Press <STORE>.
6. “PHONE INTIALIZATION” blinks while the phone is
resetting.
To reset your phone settings to manufacture’s defaults and clear all user data ,
follow these steps:
1. Press <MENU>, <7> (Security).
2. Enter lock code.
NOTE: Lock code is set as 0000 from the factory.
To change lock code see page 29.
3. Press <8> (Factory Reset).
4. Select “YES” by pressing <Volume key> (or <*>, <#>).
5. Press <STORE>.
6. “PHONE INTIALIZATION” blinks while the phone is resetting.