User's Manual

32
1: CALL TIMER ▼
2: GREETING
MY Phon_
FACTORY RESET
YES
PHONE
INTIALIZATION
MY Phone
FRI 10/10 1:24A
CHANGING GREETING MESSAGE
This feature lets you change the greeting message that the
phone displays during standby mode.
1. Press <MENU>, <7> (Configuration).
2. Press <3>(Greeting). Current greeting displays.
3. Press <OK> to change greeting.
4. Enter your new greeting message with alphanumeric keys
NOTE: Press <MESSAGE> to switch between capital and
lower case
Example) to enter “My Phone”
Press <6>, <9>, <9>, <9>, <#>, <7>, <MESSAGE>,
<4>, <4>, <6>, <6>, <6>, <6>, <6>, <3>, <3>.
5. Press <OK> to save change.
SYSTEM RESET
To reset your phone settings to manufacture’s defaults, follow these steps:
1. Press <MENU>, <8> (Security).
2. Enter lock code.
NOTE: Lock code is set as 0000 from the factory.
To change lock code see page 34.
3. Press <7> (Factory Reset).
4. Select “YES” by pressing <VOLUME KEY> (or <*>, <#>).
5. Press <OK>.
6. “PHONE INTIALIZATION” blinks while the phone is
resetting.
To reset your phone settings to manufacture’s defaults and clear all user data,
follow these steps:
1. Press <MENU>, <8> (Security).
2. Enter lock code.
NOTE: Lock code is set as 0000 from the factory.
To change lock code, see page 34.
3. Press <8> (Phone Reset).
4. Select “YES” by pressing <VOLUME KEY> (or <*>, <#>).
5. Press <OK>.
6. “PHONE INTIALIZATION” blinks while the phone is resetting.