User's Manual

15
GSM FWP
PG130/131N
NOTE: If this operation in press <SPEAKER> or lift the HANDSET state of complete, May be conflict
whit Auto send time function.
7.3 View a Contact
In Contacts menu, Scroll to Search via <Volume - +> KEY, press <OK> KEY, input nothing,
press <OK> KEY to view the contact list. Scroll to the desired contact via <Volume - +> KEY,
press <OK> KEY to view the contact information.
7.4 Service Number
1) In Contacts menu, Scroll to Service Number via <Volume - +> KEY,
press <OK> KEY, it will display the service number.
7.5 Edit a Contact
1) Refer to 7.3 View a contact, view the contacts list, press <OK> KEY, scroll to Edit via <Volume
- +> KEY, and then press <OK> KEY,
2) Scroll to the item you need to edit, press <OK> KEY to edit.
7.6 Speed Dial
The phone supports the speed dial function. You can dial the stored number
by pressing just one key.
a) Pick up handset or press <Speaker>
b) Press and hold a number-key (That you previously assigned) for a
moment.
1) In Contact menu, scroll to Speed Dial via <Volume - +>KEY, press
<OK>KEY.
2) If you want to use the speed dials function, you need to enable this
function first. Scroll to Enable Speed Dial via <Volume - +> KEY, press
<OK> KEY to enable this function to On.
3) Then scroll to Set Number via <Volume - +> KEY, press <OK> KEY,
scroll to the number which you need to assign. Press <OK> KEY to
enter options, and select assign contact and press <OK> KEY to enter
contact list, scroll to contact list to contact you want to set, press <OK>
KEY to save your contact into speed dial.
4) You also can delete a contact from Speed Dial list.
In Speed Dial list, select any contact, press <OK> KEY to Option,
scroll to Delete via <Volume - +> KEY and press <OK> KEY, then
press <OK> KEY again to confirm.
Note：When done editing, press the <Power> KEY to return to the standby screen.
Back OK
2 New
3 Service Number
OK
SN:
Back OK
Back Off
Back On
Back Off
Back Option
Back OK
1 Assign Contact
3 Service Number
4 Speed dial
1 Enable speed dial
2 Set number
1 Enable speed dial
2 Set number
1 Enable speed dial
2 Set number
2 <Empty>
3 <Empty>