User's Manual

4.11 LAN IP Setup

Clicking on the header of the “LAN IP Setup” tab will take you to its header page.

4.11.1 LAN TCP/IP Setup

The IP address in this instance is referring to the IP address that you use to log into your

router (default 192.168.0.1). If you change this, then in future you will need to log in using the

new IP address that you chosen.

There is no need to change the subnet mask. This is a unique, advanced feature of your

router. It is possible to change the subnet mask, if necessary. Do NOT make changes to the

subnet mask unless you have a specific reason to do so. The default setting is

“255.255.255.0”.

4.11.2 Use the Router as a DHCP Server

The DHCP server function makes setting up a network very easy by assigning IP addresses

to each computer on the network automatically. The DHCP server can be turned OFF, if

necessary. To do so, you must manually set a static IP address for each computer on your

network. To turn off the DHCP server, de-select “Use router As DHCP Server” and click

“Apply”.

If at anytime you would like to see which devices are connected to your MV600, please

press the DHCP clients table button