User's Manual

4.4 System Settings

From the system settings page you can perform a variety of administration tasks.

Set Password – From here you can change the password which is used to access the web

GUI

Set Username – This option allows you to modify the user name which is used to access the

web GUI

Management Interface Protocol – This option allows you to toggle between using a HTTP or

HTTPS connection when using the web GUI. If you do change to using a HTTPS connection

please ensure that you add in HTTPS in the address field of your browser

Restore Settings – This option will restore the unit to factory settings. Any modifications that

you may have mad to SSID, WPA password, Port Forwarding etc will be lost. The login will

revert back to the default settings.

Router Upgrade – Occasionally your operator may release a new firmware for your MV600,

and this new firmware can be applied using this option

CDMA Upgrade – Occasionally your operator may release a new CDMA firmware for your R-

90, and this new firmware can be applied using this option. (This is a low level firmware in

addition to the router firmware above.) The CDMA firmware can be identified as the file name

will start with ‘V6H’

Reboot Settings – Occasionally you may need to reboot your device and this can be done by

using this option.