MV241 Dialer User Manual Page 1 of 10
MV241 Dialer User Manual Rev.: 1.0 1 INTRODUCTION ............................................................................................................................................... 3 2 FEATURES .......................................................................................................................................................... 3 3 PRODUCT OVERVIEW ..........................................................................................................................
MV241 Dialer User Manual Rev.: 1.0 1 Introduction MV241 is a CDMA EVDO Rev.A USB dongle. Besides Windows OS, MV241 can also be run under MAC environment which makes it become the perfect solution for customization. MV241 can support the downlink up to 3.1 Mbps and uplink up to 1.8Mbps.
MV241 Dialer User Manual Rev.: 1.0 5. Software Installation Before you install the software, you must first install a UIM card into the USB dongle and connect the dongle to a USB port on your computer. z The first time you plug in the dongle to your computer, the dongle will run the installation application automatically.
MV241 Dialer User Manual Rev.: 1.0 Please follow the installation by clicking “Next”, the application will install the driver and the connection manager to your computer automatically. z Please click “Finish” to finish the installation. Then plug out the dongle and reinsert the dongle to PC. The connection manager will pop up automatically.
MV241 Dialer User Manual Rev.: 1.0 z Now you could use your dongle to go to the internet. Note: After the driver installed successfully, go to the Windows Control Panel and open System. Click on tab Hardware and then click on Device Manager. You should see a similar list just as the pic shows. 4 Basic function 1. Launching the Connection Manager To Launch the Connection Manager, double-click the shortcut icon of the Connection Manager on the desktop called MTS Connect. 2.
MV241 Dialer User Manual Rev.: 3. Set up a profile 1. Click ,select . 2. Get current profile from default profile. Note:Default Profile should be Number - #777 User Name – mobile Password – internet 3. You can change the profile if needed. 4. Change pin code 1. Click ,select . 2. Click button to enable pin lock, then apply it. 7 of 10 1.
MV241 Dialer User Manual Rev.: 1.0 3. Select Data Mode according to the network adapter. 4. Input old pin to the textbox , a new pin to the next one, then input the new pin to verify it in the last textbox. 5. Click to apply it. Note: EVDO will be selected prior if using EVDO+1X. 5. Get Information 1. Click ,select . 2. You can get information about Modem Model, ESN, Version(modem),Version(MTS connect) here.
MV241 Dialer User Manual Rev.: 1.0 6. Connect to the internet Click button to connect to the internet. Note: If no UIM card with USB dongle was connected to the computer, an error message will pop up. 5 Uninstall the software 1. Click to uninstall the software, press to do it. 2. During the uninstall process, please wait for a while.
MV241 Dialer User Manual Rev.: 3. Click to complete the uninstall process. 10 of 10 1.
