User's Manual

MV200 Series User’s Manual (STD Ver. 0.1)
- 10 -
Initial Setup
The initial setup for the product after purchase is as
follows. MV200 supports both UIM and Non UIM types.
When Using UIM (SIM) Card
1. Insert properly activated
UIM card provided by the
company into the UIM port..
2. Connect the USB
dongle to the PC.
If you insert a UIM
card with a PIN
lock set, the Verify PIN window will appear and you
must enter the password.
* .Note: After normally entering the PIN password, you can
use the internet with AxessManager without any other
problems. You can enter the PIN up to 3 times, and if you
forget the PIN, contact the place of purchase.
3. AxessManager will be popped up
4. After this, follow the below When Not Using UIM
(SIM) Card section’s instruction and complete the
initial settings.
When Not Using UIM (SIM) Card
(Connect the USB dongle to the PC)
1. In the AxessManager window, click [Setting].