MV210 / MV220 / MV230 / MV240 -1-
MV200 Series User’s Manual (STD Ver. 0.1) ▪ Copyright Axesstel Inc. (www.axesstel.com) holds the copyright to this user manual. This user’s manual may not be reproduced, distributed or changed in any form without permission from Axesstel Inc. ▪ Registered Trademark The registered trademarks appearing in this user manual are owned by their respective companies. ▪ Confidential & Proprietary This user manual is the intellectual property of Axesstel Inc.
MV210 / MV220 / MV230 / MV240 Templates .............................................. 16 Sending SMS......................................... 16 Table of Contents SETTINGS .......................................... 17 SAFETY NOTICE ..................................4 PRODUCT INTRODUCTION .................5 PRODUCT FEATURES .........................5 PRODUCT COMPONENTS ..................6 NAMES OF PARTS ...............................7 INSTALLING THE PROGRAM ..............8 DELETING THE PROGRAM ..........
MV200 Series User’s Manual (STD Ver. 0.1) Safety Notice This safety notice is to help protect the user’s safety and prevent any property damage or inconvenience due to accidents. Please use the product properly after thoroughly understanding the following notice. Please read this manual’s notice carefully in order to use the product safely and properly. Caution • Do not disassemble, rebuild or repair the device through one's own discretion.
MV210 / MV220 / MV230 / MV240 Product Introduction Product Features Thank you for purchasing the Axesstel MV200 Series. General Features The MV200 Series is a CDMA 1x EV-DO Rev. A type • • • • • • • USB Data Modem that can freely use wireless internet anytime and anywhere.
MV200 Series User’s Manual (STD Ver. 0.1) Data Rate Product Components Under EVDO Rev. A network The MV200 Series product components are as follows. • • Downloads: Up to 3.1 Mbps Uploads: Up to 1.8 Mbps * Note: The data speeds shown above may vary according to the operator’s network status. Mechanical Features • • LEDs: RSSI and Power indication Dimension: 35mm(W) × 92mm(H) × 9.
MV210 / MV220 / MV230 / MV240 System Requirements Names of Parts Front View • OS: Microsoft Windows 2000, XP and Vista (Driver support only: selected Linux versions and MAC Tiger 10.4 & Leopard 10.
MV200 Series User’s Manual (STD Ver. 0.1) LED Operation Installing the Program The MV200 Series has 2 LEDs, and the LEDs indicate When first installing the modem on your PC, disable the status of the device as follows. any firewalls in order to install it without problems. LED Power Data (RSSI) Data (RSSI) Color Description 1. Connect the USB dongle to the PC.
MV210 / MV220 / MV230 / MV240 Deleting the Program 2. When the device is recognized by The method for deleting the AxessManager program the PC, the program from the PC is as follows. will automatically begin installation. 1. On the taskbar, click [Start] - [Program] - [Axesstel] [AxessManager MV200] – [Uninstall]. * Note: Depending on your PC’s status and specifications, 2 or 3 minutes will be needed to install the program. 3.
MV200 Series User’s Manual (STD Ver. 0.1) Initial Setup The initial setup for the product after purchase is as follows. MV200 supports both UIM and Non UIM types. problems. You can enter the PIN up to 3 times, and if you forget the PIN, contact the place of purchase. 3. AxessManager will be popped up When Using UIM (SIM) Card 1. Insert properly activated 4.
MV210 / MV220 / MV230 / MV240 • Connect Name: Enter the name of the service provider which will appear in the options window. • Phone: Enter the phone number for modem access. (The default is “#777”) 2. In the Options window, click [New]. * Note: The default number is set #777 but depending on the country and the network operator, the set number may be • New: Register a new internet service provider. • Delete: Delete a registered internet service provider.
MV200 Series User’s Manual (STD Ver. 0.1) 4. Select a network operator registered in the Selected Service Provider list and click the [Select] button. In the Modem tab, go to the PIN section and click Disabled and then click the [Apply] button. Changing the PIN Enter the Old Pin and the new PIN that you want, then re-enter the new PIN in the Verify field and click the [Apply] button. 5. Click the button to close the Options window. Now the basic settings for connecting to the internet are complete.
MV210 / MV220 / MV230 / MV240 Using Internet 3. When connected to the internet, the [Connect to Internet] icon will turn blue and the connection time ▪ Connecting to the Internet and sent/received data will be displayed. 1. In the AxessManager window, click the [Connect to Internet] icon. * Note: After connecting to the Internet, web browsers and other such programs can be used the same as when connected through a wired connection. 2.
MV200 Series User’s Manual (STD Ver. 0.1) ▪ Disconnecting from the Internet Using SMS 1. In the Axess- ▪ Modem Connection Manager window, The method for connecting to the modem for SMS click [Disconnect usage is as follows. to Internet]. 2. As shown below, the connection will be ended and a 1. In the AxessManager window, click the Modem Connect button ( notification window will appear. Click the [OK] button. 3.
MV210 / MV220 / MV230 / MV240 ▪ Running the SMS Manager ▪ Using the SMS Manager The method for running the SMS manager is as follows. InBox In the InBox, you can reply 1. Click the SMS icon. to received messages, send messages and delete messages. SimInBox When using an USIM card, all messages are saved on 2. As shown below, the SMS Manager window appears, which can send or receive SMS messages.
MV200 Series User’s Manual (STD Ver. 0.1) OutBox Sending SMS In the OutBox, you can The method for sending SMS messages with the SMS check messages that have Manager is as follows. been sent. Also, you can select messages and 1. In the Message Box, click the [New] button. forward or delete them. 2. Enter the receiving number for DraftBox In the DraftBox you can the SMS and enter the check messages that have message. not been sent but have been saved.
MV210 / MV220 / MV230 / MV240 ▪ Disconnecting the Modem Settings The method for disconnecting the modem is as follows. You can change the settings for using the modem and the internet. While using the modem, click the Setting 1. In the AxessManager window, click the Modem Connect ( icon. ) button. 2. The SMS icon will become deactivated and the modem connection will terminate. Internet Manage the settings for connecting to the internet in the Internet tab.
MV200 Series User’s Manual (STD Ver. 0.1) Modem You can set the Data Mode and the user password in the Modem tab. SMS In the SMS tab, you can choose whether to Auto Erase messages for when the internal memory space is too low. ETC. In the ETC. tab, you can reset the device and check the model name and S/W version.
MV210 / MV220 / MV230 / MV240 Memo - 19 -
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
MV200 Series User’s Manual (STD Ver. 0.
