User's Manual

GETTING STARTED

Before you can begin using the Modem, you must:

¾ Install the Modem enabling software and driver.

¾ Activate an account and configure the Modem to use your account (unless

the Modem has been pre-activated).

CONNECTING YOUR MODEM TO THE PC

Installing the modem

This modem operates by receiving DC power

from the AXESSTEL power adaptor that

connects to an electrical outlet. The modem is

equipped with a rechargeable battery as a

back up in case of an AC power failure.

Modem installation

1. Plug the smaller end of the adaptor into the

modem as shown and plug the other end

into your laptop’s or PC’s USB port

Note: In case you want to install the driver files (e.g. AxessManager or USB driver files), press and

hold down the ON/OFF button while inserting the USB cable to the PC port. From “My Computer”

window, you will see the modem as another drive (i.e. E: drive or F: drive).