User's Manual

19
1.3. Connecting/Disconnecting Your Modem to/From the PC
.
Connecting
First, connect your PC with the modem using the cable supplied with the modem.
Insert the cable firmly to the modem until it clicks into place.
Click the icon on your desktop to run the AxessManager Program.
Click the Connect/Disconnect button . When the connection is successful, you can use
the AxessManager program.
All icons will be enabled
.
Disconnecting
1) Click the Connect/Disconnect button after finishing your job.
The connection is discontinued and the active Connect/Disconnect button is changed to
the disabled status. All icons will be disabled
2) To exit the program after finishing the job, click the button at top right of the program
window.
3) Disconnect the cable from PC and modem.