User's Manual

4
INSTALLING THE MODEM SOFTWARE
System Requirements
The system requirements for using this software are summarized below:
(1) Recommended Specifications
CPU: Pentium III 550MHz or higher, IBM PC-Compatible
RAM: 256MB or more
VGA: Video card with1024 I 768 resolution and 65536 or more colors
HDD: 200MB or more hard disk space
Others: CD-ROM Drive or DVD Drive
OS: Microsoft Windows 2000 or higher (Compatible with Vista version)
(2) Minimum Specifications
CPU: Pentium II 300MHz or higher, IBM PC-Compatible
RAM: 128MB or more
VGA: Video card with1024 I 768 resolution and 65536 or more colors
HDD: 100MB or more hard disk space
Others: CD-ROM Drive or DVD Drive
OS: Microsoft Windows 2000 or higher
(3) CD Package for Win 98/ME/NT
If O/S version of your PC is Windows 98/ME/NT, you should use CD Package for
installation of USB Driver and AxessManager.
Installing the USB Driver and AxessManager
The entire process will take approximately 5 minutes to complete.
Step 1: After inserting the Card to the PC port the above window will appear. Click
“Axesstel Manager Setup.exe” to install AxessManager.
Note: If Windows OS auto-play feature is not available and you don’ t see the pop-
up window in step 1, click on “ Start” then “ My Computer” to see the virtual
drive associated with the Card. Double-click on that drive to see the pop-up
window shown in step 1