User's Manual

World Best CDMA WLL Technology

Wall Mount Installation

1. Mark two mounting hole locations to match the screw hole in the back of the terminal.

2. Drill two holes at the marked locations.

3. Tighten the screws until the head is about 5mm from the wall.

5. Plug in the power connector and route the cord in the groove, if needed.

6. Screw the antenna into antenna connector.

7. Hang the terminal on the screw using the two holes in the back.

8. Push the terminal down until the unit is firmly locked into place.

AXW-T800 / 800R / 1900 / 1900R

Fixed Wireless Phone