User's Manual

HANG THE LOCK CODE
C
ESTRICTING OUTGOING CALLS
R
16
World Best CDMA WLL Technology
The lock code prevents the terminal from being used by unauthorized person without
your permission. The default lock code is Ò Ó.
To change the lock code:
1. Pick up the handset.
2. Press .
3. Enter old 4 digit lock code followed by . For example . Beep sounds as
confirmation. If not correct, error tone will sound and the terminal returns to standby mode.
4. Enter new 4 digit lock code followed by . For example . Another beep
sounds as confirmation.
5. Re-enter 4 digit lock code followed by . For example . Another beep
sounds as confirmation. If not correct, error tone will sound and the terminal returns to
standby mode.
This feature can be used block outgoing calls from being made, but still wish to receive
incoming calls at any time.
1. Pick up the handset.
2. Press .
3. Enter 4 digit lock code.
4. Press to enable or to disable.
Note 1: Default lock code is " ". To change, see page 16.
Note 2: If someone tries to make a call when outgoing call restriction is enabled, the terminal
sounds beep and howler tone.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone