User's Manual

World Best CDMA WLL Technology

ETTING CALLER ID MODE

ETTING AUTOSEND TIME

ETTING DTMF LENGTH

If your phone connected to the terminal is caller ID enabled, you can set the terminal

to display the caller identification number or name on the telephoneÕs LCD display.

1. Pick up the handset.

2. Press for disable the Caller ID feature.

3. Press for DTMF Standard Type.

4. Press for FSK (Bellcore) type.

NOTE: The default setting of Caller ID is DTMF type.

When finished entering dial number, the terminal waits a fixed time before

attempting to make a call. This Òauto sendÓ time can be changed.

1. Pick up the handset.

2. Press . Then press ~ or . 4~9 seconds or off.

3. Press .

For example, to set 5 seconds, press .

Note: Default autosend time is 4 seconds.

Some ARS (Automatic Response Service) requires long DTMF tone.

1. Pick up the handset.

2. Press .

3. Press for long DTMF and for short DTMF.

AXW-T800 / 800R / 1900 / 1900R

Fixed Wireless Phone