User's Manual

10
World Best CDMA WLL Technology
OWER ON / OFF
P
There is power switch on the bottom side of the terminal.
1. Turn on the terminal by moving switch to ON position.
2. Press the power switch more than 2 seconds to turn off the FWT.
NOTE: When you turn on the terminal, it automatically searches for service signal. When it
successfully acquires service signal, it generates dial tone on the handset.
Starting with RUIM (AXW-T450R/800R/1900R models only)
When the Pin Code of R-UIM Card is turned on, you may need to enter the Pin Code when ou
power on the terminal.
1. Lift the receiver of the analog telephone.
2. Using the numeric keypad of the analog phone, enter Pin Code.
Note 1: Pin code checking can be turned on/off. Please see page ___.
Note 2: You may enter pin code up to 3 times. After 3 times, you will need to re-start the terminal.
Note 3: Default pin code is provided by the service provider. Please contact your service provide
in case you do not remember the pin code.
AXW-T800 / 800R / 1900 / 1900R
Fixed Wireless Phone