User's Manual

CDMA 2000 Wireless Local Loop AXW-P800/P1900
1. Mark two mounting hole locations on the wall.
2. Drill two holes at the marked location.
3. Attach the wall mountable bracket.
4. Tighten the screws firmly.
5. Plug in power connector and route the cords in a groove.
6. Install the phone onto the wall mount bracket hook.
Push the phone against the wall and pull it down to lock.
7. Screw the antenna into antenna connector.
8. Pull out the handset hanger and reinsert it in the reverse way.
NOTE : The input voltage and the shape of the plug may vary from country to
country. The input and output voltages are indicated on the adapter
(Input: AC 100~240V, 50~60Hz, Output: DC 9V, 1A).
E
T
T
I
N
G
U
P
Y
O
U
R
P
H
O
N
E
Wall mount installation
World Best CDMA WLL Technology
S