User's Manual

1 Make sure your phone is turned on.

2 Pick up the handset to hear a dial tone.

When the phone fails to acquire service signal, you will hear

"No Service"tone (intermittent tone).

3 Dial the number to call. The LCD window displays

the number.

4 Wait for a moment or press .

5 When the other person answers, begin your conversation.

6 To end the call, replace the handset.

NOTE1: Modifying a phone number while dialing..

- To erase the last digit entered: Press briefly.

- To erase the entire number: Press and hold.

NOTE2: Automatic calling

The phone was set to places a call automatically 4 seconds after last digit entry from

the factory. To disable automatic sending,

1 Press , , .

2 Press or , to select "OFF", then press to save.

Once automatic sending is disabled, you have to dial number

and press to place a call.

1 Pick up the handset or press .

2 Press .

NOTE : You cannot redial in the above manner when

the power is just on. 'NO LAST CALL!' will display.

CDMA 2000 Wireless Local Loop AXW-P800/P1900

LACING CALLS

Redial the last number you dialed.

World Best CDMA WLL Technology

EDIAL

RECALL

CLEAR

RECAL

DIAL

PLEASE

123-456-7890

CALLING....