User's Manual

4.6 Changing the Default Password

Now that the battery is installed and the power adaptor connected you are ready to use

some of the more advanced features of the AX54.

To change the default password please follow the instructions below.

Using your keypad please enter the following

*#→password→00->new password*→new password→Func Key

NOTE: IT IS ADVISABLE TO CHANGE YOUR PASSWORD AS SOON AS YOU

CONNECT THE UNIT

*Default password is 1234. So if you wanted to change your password to 4897, then

you would enter the following:

*#1234004897*4897 <Func>