User's Manual

77
 Association: After inclusion, define the relationship between devices
(primary/secondary), by specifying one as primary to control the other secondary
device.
On AX140 enter the command [#password81Group IDFunc-Key]; on
the other Z-Wave sensor [Click the button in secondary sensor first then in the
primarysensor; this will add the primary sensor to secondary sensor association
group(see manufactures instructions for device)] If no Group ID is found, user can
specify (example “1”).
To Remove the Association (primary sensor from secondary sensor):
On AX140 enter the command [#password82Group IDFunc-Key].
 Manual Association to the AX140 Controller:
On AX140 enter the command [#password83Group IDFunc-Key]; Click
the Z-Wave button on the primary sensor will add it to Controller Association
Group.
To Remove the primary sensor Association Group:
On AX140 enter the command [#password84Group IDFunc-Key]