User's Manual

49
30 Second Delay
Func Key72Func Key
45 Second Delay
Func Key73Func Key
Example: If you want to set the entry delay to 15 seconds, then you would enter the
following:
 
4.1.12 Set Exit Mode
You can modify the exit time delay to suit your needs. This will delay a sensor from being
triggered from between 0 and 120 seconds. The default exit delay is set to 30 seconds.
To adjust the exit delay please follow the instructions below. You must be in the
programming mode to perform this function.
No Exit Delay
Func Key80Func Key
30 Second Delay
Func Key81Func Key
60 Second Delay
Func Key82Func Key
90 Second Delay
Func Key83Func Key
120 Second Delay
Func Key84Func Key
Func
1
7
Func