User's Manual

48
4.1.10 Adding the Panic Key Fob
To add the 1-Button Panic Key Fob (AZ310) to the Axesstel Home Alert please follow the
instructions below. You must be in the programming mode to perform this function.
Func Key16FuncKey
Press and Release the Panic Key 3 times
You need to press the Panic Key Fob button within 30 seconds to registerit correctly. If
the Panic Key Fob has not been registered properly there will be a long beep and all 4
Zone LEDs will blink red 3 times. If the Panic Key Fob has been registered properly then
you will hear 2 beeps and all 4 Zone LEDs will blink green 1 time.
4.1.11 Set Entry Mode
You can modify the entry time delay to suit your needs. This will delay a sensor from
being triggered from between 0 and 45 seconds. The default entry delay is set to 30
seconds. To adjust the entry delay please follow the instructions below. You must be in
the programming mode to perform this function.
No Entry Delay
Func Key70Func Key
15 Second Delay
Func Key71Func Key