User's Manual

47
therewill be a long beep and all 4 Zone LEDs will blink red 3 times. If the sensor has been
removed properly then you will hear 2 beeps and all 4 Zone LEDs will blink green 1 time.
4.1.9 Adding the Key Fob
To add the 4-Button Key Fob (AZ300) to the Axesstel Home Alert please follow the
instructions below. You must be in the programming mode to perform this function.
Func Key16FuncKey
Press the Arm and Panic Keys simultaneously for at
least 0.5 seconds
You need to press the Key Fob button within 30 seconds to registerit correctly. If the Key
Fob has not been registered properly there will be a long beep and all 4 Zone LEDs will
blink red 3 times. If the Key Fob has been registered properly then you will hear 2 beeps
and all 4 Zone LEDs will blink green 1 time.