User's Manual

38
4.1.2 Adding SMS Numbers
When a motion sensoror other accessory is triggered in any zone, you can choose to
send an SMS to up to 3 numbers. SMS numbers can be added into your Axesstel Home
Alertin two different manners.
A phone call from the desired number will register that number in the designated slot by
following these instructions. You must be in the programming mode to perform this
function.
Add SMS #1
Func Key31Func Key00Func Key
Then call from phone number
Add SMS #2
Func Key32Func Key00Func Key
Then call from phone number
Add SMS #3
Func Key33Func Key00Func Key
Then call from phone number
As an alternative the SMS numbers can be programmed entirely via the keypad. Once in
the programming mode please enter the following:
Add SMS #1
Func Key31Func KeySMS #1SMS #1Func Key
Add SMS #2
Func Key32Func KeySMS #2SMS #2Func Key
Add SMS #3
Func Key33Func KeySMS #3SMS #3Func Key