User's Manual

29
3. Using your 200 Series as a Landline Replacement Phone
3.1 Power On/Off
The power button is located on the top of the AX240. Plug the power adapter into an AC
power wall outlet.Plug the power adapter into the power connector on the back of the
device.
Push the power button on top of the device for several seconds, then release. The green
light will illuminate. Turn the AX240 off by pushing the power button on top of device for
several seconds, then release. The green light will turn off.
3.2 Activation
To activate your AX240 using Over the Air Service Provisioning (if supported by your
carrier) turn on your device.The device will begin its initiation process and start to acquire
the network. Wait 2 minutes to complete. From your connected phone dial *228 and
follow the voice prompts to complete the activation.
NOTE:Check with your service provider before activation as your device may already be
activated.