User's Manual

22
Account (Bill)
OFF
Optional use by Network
Programming
Mode
Green
When in Programming Mode the Power, Battery,
Signal and Setting/Register LEDs will be green
Programming
Mode Exit
Blink Red
When in Programming Mode after a key is
pressed, if 5 seconds elapse before another key
is pressed all 4 Zone LEDs will blink red 3 times
and the programming sequence will need to
begin anew. If 30 seconds elapse before another
key is pressed, the Axesstel Home Alert will exit
the programming mode and all LEDs will return
to their normal state
Programming
Success
Blink Green
When in Programming Mode successful
programming
will result in all 4 Zone LEDs blinking green 1
time
Programming
Failure
Blink Red
When in Programming Mode failed programming
will result in all 4 Zone LEDs blinking red 3 times