User's Manual

2. Plasterboard and wooden walls block less of the radio signal then concrete, brick or tile

walls which will have more of an effect on signal strength.

3. Wall mounted Z-Wave devices will also suffer a loss of range as they are housed in metal

junction boxes which could reduce the range by up to 25 to 30%.

Z-Wave basic terminology:

Include /Exclude: Include and exclude are the Z-Wave terms used to describe adding,

removing or deleting devices to or from the control network.

Replicate: This is the Z-Wave term for copying or transferring the Z-Wave network data (all

devices) to a new controller. This process is also used to update secondary controllers after

changes have been made to the control network with the primary controller.

Functional Overview:

This device is based on the Z-Wave Controller Library and works with devices that support the

following Z-Wave Device/Command Classes:

Z-Wave device type:

Basic Device Class: BASIC_TYPE_CONTROLLER

Generic Device Class: GENERIC_TYPE_STATIC_CONTROLLER

Specific Device Class: SPECIFIC_TYPE_NOT_USED