Operating instructions

TM 11-5865-229-12
NOTE
The RT and program module assembly are classified CONFIDENTIAL. Control all classified
equipment in accordance with appropriate government regulations.
a. Tools and Materials Required.
Tool Kit, Electronic Equipment TK-101/G
Screwdriver, #2 common-tip
Flashlight
Torque Screwdriver, TS-100
Driver Bit, #2 common-tip, X185-4
Static Barrier Bag
Static Caution Label
b. RT Mode Verification.
Perform the following procedure to verify the RT mode setting. Your com-
mander will tell you what mode the RT should be in.
Use a flashlight to see if the white jumper plugs are visible through the window in the program module
assembly cover while viewing the window at eye level.
●
If the white plugs are visible, the RT is in the INHIBIT mode.
●
If the white plugs are not visible, the RT is in the UNINHIBIT mode.
If the RT mode setting does not agree with your commander’s direction, proceed to the RT mode
change procedure (paragraph 3-14d).
3-38