Operating instructions

TM 11-5865-229-12
3-13 ANTENNA REMOVAL AND INSTALLATION.
This paragraph contains removal and installation instructions for antennas installed with flexible coaxial ca-
ble and antennas installed in EH-60A aircraft that use rigid waveguide. For antenna installations that use
rigid coaxial cable or flexible waveguide, refer to the applicable aircraft manual listed in appendix A.
a. Tools and Materials Required.
Tool Kit, Electronic Equipment TK-101/G
Hex Driver, Ball Point 7/64 in
Screwdriver, #2 cross-tip
Waveguide Caps (as required)
Preformed Gaskets (as required)
Clean Rags
Freon TMS
b. Antenna Removal (Flexible Coaxial Cable Installations).
Perform the following procedure to re-
move antenna from the aircraft.
Turn system power off. Refer to aircraft manual for instructions.
Remove eight screws from antenna mounting flange.
Carefully pull antenna and coaxial cable out of aircraft.
3-22