Operating instructions

TM 11-5865-229-12
3-12 RT REMOVAL AND INSTALLATION.
a. Tools and Materials Required.
Tool Kit, Electronic Equipment TK-101/G
Flashlight
Torque Wrench, Preset CHA-5
Wrench, Open End Standard, 9/16 in
Slip Joint Pliers, Padded AT-5O8K
b. RT Removal.
Perform the following procedure to remove the RT from the aircraft.
Turn system power off. Refer to aircraft manual for instructions.
Locate the RT. Refer to aircraft manual for location.
NOTE
The RT and program module assembly are classified CONFIDENTIAL. Always keep the RT
and program module assembly in a closed area at a secure facility when storage is required.
TYPICAL LOCATION OF RT
3-18