Operating instructions

TM 11-5865-229-12
When the CCU mode switch is in the OPR position, the system is radiating RF energy. All personnel
shall stay at least 6 feet away from either antenna.
Turn CCU mode switch clockwise from STBY to OPR.
NOTE
If NO GO lamp lights when the CCU mode switch is placed in OPR position, turn mode switch
counterclockwise to OFF and immediately clockwise to OPR once or twice. If NO CTO lamp remains
lit, perform the operational test (paragraph 3-9).
Momentarily depress BIT switch.
All lamps light, tone is heard briefly in headset, then all lamps turn off.
The CM Set is now ready for use.
NOTE
The NO GO lamp may remain lit briefly after all other lamps have turned off.
If the NO GO lamp remains lit for more than 15 seconds, perform the operations
(paragraph (3-9).
test
The CM Set automatically runs BIT during operation. If a failure occurs, the NO GO lamp will
light.
2-5/2-6 (blank)