Owner's manual

DT – Series User’s Manual
MKTF-208
DO NOT UNDER ANY CIRCUMSTANCE
OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.
FEED WATER AND
Nothing has a greater effect on a reverse osmosis system than the feed water quality
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
REQUIREMENTS. FAIL
URE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.
OPERATING LIMITS
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
SYSTEM’S PRODUCTION.
REJECTION, RECOVERY AND
DT-Series r
everse osmosis systems
capacities indicated by the suffix in the system’s name under the conditions listed
above.
For example, the D
at the listed operating test conditions.
5
DO NOT UNDER ANY CIRCUMSTANCE
REMOVE ANY CA
U
OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.
FEED WATER AND
OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water quality
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
URE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
REJECTION, RECOVERY AND
FLOW RATES
everse osmosis systems
are designed to produce permeate
capacities indicated by the suffix in the system’s name under the conditions listed
For example, the D
T-10000 produces 100
00 gallons per day of
at the listed operating test conditions.
06/12
U
TION, WARNING,
OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water quality
.
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
URE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
FLOW RATES
are designed to produce permeate
water at the
capacities indicated by the suffix in the system’s name under the conditions listed
00 gallons per day of
permeate water