Manual

BT – Series User’s Manual
MKTF - 206
3.
Be certain that all of the components of the feed water are soluble
concentrations attained in the system.
NOTE: FEED LINE MUST BE
PERMEATE (PRODUCT WATER) CONNECTION
Locate the 3/8” tubing
labeled permeate and attach to storage tank
permeate water can flow freely
irreversible
damage to the membrane elements.
the holding tank
with PVC fittings, or other FDA approved materials
material being used does not di
CAUTION
THE PH OF THE REVERSE O
TYPICALLY BE 1-
2 POINTS LOWER THAN THE FEED WATER PH. A LOW PH CAN
BE VERY AGGRESSIVE TO SOME PLUMBING MATERIALS SUCH AS COPPER
PIPING.
CONCENTRATE (WASTE WATER)
Locate the 3/8” tubing
labeled
concentrate line
to an open drain in a free and unrestricted manner (no backpressure).
CAUTION: ANY RESTRICTIONS OR BLOCKAGE IN THE DRAIN LINE CAN
CAUSE
BACKPRESSURE, WHICH WILL INCREASE THE SYSTEM’S OPERATING
PRESSURE. THIS CAN RESULT IN DAMAGE TO THE SYSTEM’S MEMBRANES AND
COMPONENTS.
ELECTRICAL
The motor used on the BT
-
in 110/220 Volt 50/
60 Hertz 1 P
electrical cord.
110V model
E
nsure that the electrical circuit supplying the system is compatible with the
req
uirements of the specific B
7
Be certain that all of the components of the feed water are soluble
concentrations attained in the system.
NOTE: FEED LINE MUST BE
MINIMUM 1/2” INCH.
PERMEATE (PRODUCT WATER) CONNECTION
labeled permeate and attach to storage tank
.
permeate water can flow freely
with no backpressure.
Backpressure can cause
damage to the membrane elements.
The
3/8” permeate line
with PVC fittings, or other FDA approved materials
.
material being used does not di
ssolve into the permeate water.
THE PH OF THE REVERSE O
SMOSIS PERMEATE WATER WILL
2 POINTS LOWER THAN THE FEED WATER PH. A LOW PH CAN
BE VERY AGGRESSIVE TO SOME PLUMBING MATERIALS SUCH AS COPPER
CONCENTRATE (WASTE WATER)
CONNECTION
labeled
concentrate and attach the tubing to
a
to an open drain in a free and unrestricted manner (no backpressure).
CAUTION: ANY RESTRICTIONS OR BLOCKAGE IN THE DRAIN LINE CAN
BACKPRESSURE, WHICH WILL INCREASE THE SYSTEM’S OPERATING
PRESSURE. THIS CAN RESULT IN DAMAGE TO THE SYSTEM’S MEMBRANES AND
-
Series systems is a carbonator motor.
The motor is
60 Hertz 1 P
hase. Each BT-Series
system is equipped with a 5 foot
110V model
s are equipped with a plug.
nsure that the electrical circuit supplying the system is compatible with the
uirements of the specific B
T model you are installing.
06/12
Be certain that all of the components of the feed water are soluble
at the
.
Ensure that the
Backpressure can cause
3/8” permeate line
can be run to
.
This is so the
SMOSIS PERMEATE WATER WILL
2 POINTS LOWER THAN THE FEED WATER PH. A LOW PH CAN
BE VERY AGGRESSIVE TO SOME PLUMBING MATERIALS SUCH AS COPPER
a
drain. Run the
to an open drain in a free and unrestricted manner (no backpressure).
CAUTION: ANY RESTRICTIONS OR BLOCKAGE IN THE DRAIN LINE CAN
BACKPRESSURE, WHICH WILL INCREASE THE SYSTEM’S OPERATING
PRESSURE. THIS CAN RESULT IN DAMAGE TO THE SYSTEM’S MEMBRANES AND
The motor is
available
system is equipped with a 5 foot
nsure that the electrical circuit supplying the system is compatible with the