Owner manual

AT – Series User’s Manual
MKTF-205
DO NOT UNDER ANY CIRCUMSTANCE
OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.
FEED WATER AND
Nothing has a greater effect on a reverse osmosis system than the feed water quality
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
REQUIREMENTS.
FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.
OPERATING LIMITS
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
SYSTEM’S PRODUCTION.
REJECTION, RECOVERY AND
AT-Series r
everse osmosis systems
capacities indicated by the suffix in the system’s name under the conditions listed
above. For example, the AT
the listed operating
test conditions.
The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
percentage. For example, a 98.5% rejection rate means that 98.5
5
DO NOT UNDER ANY CIRCUMSTANCE
REMOVE ANY CA
U
OR OTHER DESCRIPTIVE LABELS FROM THE SYSTEM.
FEED WATER AND
OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water quality
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
AND VOID THE MANUFACTURER’S WARRANTY.
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
REJECTION, RECOVERY AND
FLOW RATES
everse osmosis systems
are designed to produce permeate
capacities indicated by the suffix in the system’s name under the conditions listed
above. For example, the AT
-500 produces 500 gallons per day of
permeate
test conditions.
The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
percentage. For example, a 98.5% rejection rate means that 98.5
% of total dissolved
06/12
U
TION, WARNING,
OPERATION SPECIFICATIONS
Nothing has a greater effect on a reverse osmosis system than the feed water quality
.
NOTE: IT IS VERY IMPORTANT TO MEET THE MINIMUM FEED WATER
FAILURE TO DO SO WILL CAUSE THE MEMBRANES TO FOUL
NOTE: HIGHER TDS AND/OR LOWER TEMPERATURES WILL REDUCE THE
FLOW RATES
are designed to produce permeate
water at the
capacities indicated by the suffix in the system’s name under the conditions listed
permeate
water at
The amount of total dissolved solids (TDS) rejected by the membrane is expressed as
a
% of total dissolved