User's Manual
13
MULTIFUNCTION DIAL
2
LEVEL SELFCLEANING FUNCTION ON / OFF
As soon as you sit down on the toilet seat, the spray arm will be cleaned with fresh water.
This function can be turned ON or OFF.
Factory setting: Self-cleaning function is ON
When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly):
- Press and hold the multifunction dial.
- Turn it counter clockwise.
Short «beep»: Self-cleaning function is ON
Long «beep»: Self-cleaning function is OFF
The system purge process will automatically stop after 90 seconds.
LEVEL SYSTEM PURGE
If the toilet has not been used for a long period of time, old water may be purged from the system and
replaced with fresh water.
When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly):
- Turn multifunction dial clockwise.
- You will hear one short «beep». The system purge has started.
- When the system purge is in progress, turn multifunction dial clockwise again, the system purge pro-
cess stops in the same time you’ll hear one long «beep» .
The system purge process will automatically stop after 90 seconds .
Turn multifunction dial clockwise again to stop the system purge procedure immediately.