User's Manual

24
MAINTENANCE
SYSTEM PURGE
OPERATION WITH MULTIFUNCTION DIAL
LEVEL 1 is activated (see page 14 for operation):
Turn the Multifunction dial clockwise to start System Purge with one
«beep».

- The system purge process stops automatically after completion.
Turn the Multifunction dial clockwise again to stop system purge imme-
diately.
OPERATION WITH REMOTE CONTROL
System
Purge
Press « System Purge » to start System Purge with one «beep».

- The system purge process stops automatically after completion.
Stop
Press « Stop » to stop system purge immediately.
If the intelligent toilet has not been used for a long period of time, water inside of the unit should
be purged. The toilet will refill itself with fresh water.
It is normal for water to run out from the cleaning wand normally extends during the system
purge.