User's Manual
Table Of Contents
- 1 SYSTEM DESCRIPTION
- 2 REPEATER INSTALLATION
- 2.1 Requirements
- 2.1.1 Service Antenna Requirements (English)
- 2.1.2 Service Antenna Requirements (French)
- 2.1.3 RF Cable Installation Guidelines
- 2.1.4 Grounding Wires Requirements
- 2.1.5 Power Requirements
- 2.1.6 Optic Cables Guidelines
- 2.1.7 EMV Protection
- 2.1.8 External Alarm and Relay Considerations
- 2.1.9 Location Criteria
- 2.2 Standard Repeater Installation
- 2.2.1 Overview
- 2.2.2 Unpacking and Accessories
- 2.2.3 Rack Mount Installation
- 2.2.4 Wall Mount Installation
- 2.2.5 Grounding
- 2.2.6 Optic Fibre Connection
- 2.2.7 Service Antenna Connections
- 2.2.8 Power Connections and Power On
- 2.2.9 Optional - External Alarm and Relay Connections
- 2.2.10 Closing and Securing the Repeater
- 2.3 Repeater with Fan Hood Installation
- 2.4 Five-Band System Installation
- 2.1 Requirements
- 3 OPENING A SESSION AND NAVIGATING GUI
- 4 MBF-40 COMMISSIONING
- 5 MBF-40 FULL GUI DESCRIPTION
- 6 MONITORING AND FAULT SOURCING
MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page |B- 1
Appendix B - Canada Specifications
Frequency Range Uplink (UL) Downlink (DL) Operational BW Power (Mean)
LTE700
Lower band 698-716MHz 728-746MHz 29MHz +37dBm
Upper band
776-787MHz
746-757MHz
29MHz
+37dBm
800MHz (Sprint) 817-824 MHz 862-869 MHz 32MHz +37dBm
850MHz (Cellular) 824-849MHz 869-894MHz 25MHz +37dBm
1900MHz
1850-1915MHz
1930-1995MHz
65MHz
+37dBm
1700MHz (AWS) 1710-1755MHz 2110-2155MHz 45MHz +39dBm
General Parameters
Noise Figure
3dB Typical (maximum gain)
Ripple ±2dB
Propagation Delay
< 2µs
Nominal UPLINK Gain
and Nominal BW
UL Nominal Gain
(adjustable in 1dB steps)
Nominal 20dB Bandwidth
LTE700
Lower band
45 dB
28 MHz
Upper band
45 dB
21 MHz
800MHz (Sprint) +
850MHz (Cellular)
48 dB 41.5 MHz
1900MHz 49 dB 82 MHz
1700MHz (AWS) 49 dB 71.5 MHz
Nominal DOWNLINK
and Nominal BW
DL Nominal Gain
(adjustable in 1dB steps)
Nominal 20dB Bandwidth
LTE700 Lower band 46 dB 38.5 MHz
Upper band
46 dB
38.5 MHz
800MHz (Sprint) +
850MHz (Cellular)
46 dB 42 MHz
1900MHz
49 dB
79MHz
1700MHz (AWS) 49 dB 69 MHz
System Impedance 50Ω
Return loss at antenna
connections
>14dB
Antenna Connectors DIN 7/16
No. of antenna ports
1 for single/dual/tri/quad band, 2 connectors for MIMO
Electrical ratings 115VAC 60Hz, -48VDC
Cooling Convection in single, dual and tri-band. Quad-band requires fan hood
Optical Parameters
Wavelength DL/UL 1310/1550nm
Max optical Loss 10dBo
F/O Connector
1 SC/APC for SISO, 2 for MIMO
Modulation Accuracy at nominal output power
GSM/GMSK <2.5º RMS and <10º peak
EDGE/8-PSK
<3% EVM RMS
WCDMA/EVM <12.5% RMS (composite according to ETSI TS 25.106 with TM1/64 DPCH
LTE/EVM < 8% (composite according to 3GPP TS 136 106)
PkCDE
<-33dB (ETSI TS 25.106 with TM 1/64 DPCH and spreading factor 256)
Power Consumption Single Band Dual Band Tri Band Quad Band
140W
220W
350W
400W
Mechanical Single Band Dual Band Tri Band Quad Band
Dimensions 21.3” x 15” x 7.8”
540x382x198mm
21.3” x 15” x 7.8”
540x382x198mm
21.3” x 15” x 12.3”
540x382x313mm
21.3” x 15” x 12.3”
640x382x313mm
Weight
44lbs (20kg)
48.5lbs (22kg)
76lbs (34kg)
83lbs (38kg)
Enclosure Aluminum (IP65)
Environmental
EMC
IC
Operating Temperature -77 to +121ºF (-25 to +50ºC)
Storage Temperature
-86 to +158ºF (-30 to +70ºC)
Humidity ETSI EN 300 019-2-4 (see compliance below)