User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | 2-33
2.3.4 Bracket and Fan-Hood Assembly
WARNING!!
This Fan Hood is to be assembled only on the MBF-
40 units for which it is
designed and with which it is supplied.
Do NOT assemble this fan hood on any repeater models for which it is not
specifically designed.
Be sure to CAREFULLY follow all instructions – beginning with Step-1.
The fan hood and bracket assembly procedure is as follows:
• Assemble rear fan hood and mounting brackets
• Mount the repeater on the wall
• Assemble the front fan hood
• Connect power to both fan hoods
To assemble the fan hood
1. Place the repeater on a flat surface, repeater door panel facing down , interfaces towards you.
2.
Loosely assemble the mounting brackets:
• Align
innermost bracket holes to repeater mounting holes.
•
Loosely insert bolts and washers.
Figure 2-41: Place Brackets on top the MBF
Repeater front door panel
facing down
Align
brackets and loosely insert
x4 bolts and washers