User's Manual
Table Of Contents
- 1 SYSTEM DESCRIPTION
- 2 REPEATER INSTALLATION
- 2.1 Requirements
- 2.1.1 Service Antenna Requirements (English)
- 2.1.2 Service Antenna Requirements (French)
- 2.1.3 RF Cable Installation Guidelines
- 2.1.4 Grounding Wires Requirements
- 2.1.5 Power Requirements
- 2.1.6 Optic Cables Guidelines
- 2.1.7 EMV Protection
- 2.1.8 External Alarm and Relay Considerations
- 2.1.9 Location Criteria
- 2.2 Standard Repeater Installation
- 2.2.1 Overview
- 2.2.2 Unpacking and Accessories
- 2.2.3 Rack Mount Installation
- 2.2.4 Wall Mount Installation
- 2.2.5 Grounding
- 2.2.6 Optic Fibre Connection
- 2.2.7 Service Antenna Connections
- 2.2.8 Power Connections and Power On
- 2.2.9 Optional - External Alarm and Relay Connections
- 2.2.10 Closing and Securing the Repeater
- 2.3 Repeater with Fan Hood Installation
- 2.4 Five-Band System Installation
- 2.1 Requirements
- 3 OPENING A SESSION AND NAVIGATING GUI
- 4 MBF-40 COMMISSIONING
- 5 MBF-40 FULL GUI DESCRIPTION
- 6 MONITORING AND FAULT SOURCING
MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | 2-31
2.3.2 Physical Installation Overview
The installation of the repeater with fan-hood consists of the steps detailed below.
This section describes the packing list, brackets assembly and fan-hood assembly. The mounting and
connections procedures are identical to those described in section
2.2 - Standard Repeater
Installation. The latter are indicated by an asterisk (*) in the overview below.
Figure 2-40 Repeater with Fan-hood Assembly Physical Installation Overview
* These steps are identical to the steps detailed in Standard Repeater Installation described in section 2.2.
Step-1
•Unpacking
Step-2
•Bracket and Fan-hood Assmbly
Step-3
•Wall Preparation and Repeater Mounting*
Step-4
•Grounding*
Step-5
•Antenna connections*
Step-6
•Alarm connections*
Step-7
•Power connections*