User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | V
System Maintenance
• In the event of a failure Cobham Wireless’s support service should be contacted for advice on a possible
module replacement or other action to be taken.
• If a shipment of a repeater back to Cobham Wireless is made within the period of guarantee the original
packing must be used.
• The system normally operates without any operator intervention or maintenance. If in the unlikely event of
any unit failure, the faulty repeater should be replaced. A failed unit can be removed and replaced with a
spare while the rest of the system (other repeaters) is still operating. However, the power supply of the
failed repeater should be isolated from the power before anything is replaced.
• Component Replacement - None of the modules in the repeater can be replaced without removing the
repeater from its mounting and opening the cover of the repeater.
• In the event of a malfunction in the system, the status of the antenna systems as well as the continuity of
the cabling should be checked before replacing any modules within the repeater.
Product Disposal
Product Disposal - Disposal of this product must be handled according to all national laws and regulations. For
detailed information regarding materials, please refer to Cobham Wireless.
System Batteries
The Repeater contains two types of batteries:
• A battery pack in the power supply unit, consisting of 8X NiMh batteries.
• A button cell CR1216 on the controller board.
CAUTION!! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to local laws and instructions.