User's Manual
Table Of Contents
- 1 SYSTEM DESCRIPTION
- 2 REPEATER INSTALLATION
- 2.1 Requirements
- 2.1.1 Service Antenna Requirements (English)
- 2.1.2 Service Antenna Requirements (French)
- 2.1.3 RF Cable Installation Guidelines
- 2.1.4 Grounding Wires Requirements
- 2.1.5 Power Requirements
- 2.1.6 Optic Cables Guidelines
- 2.1.7 EMV Protection
- 2.1.8 External Alarm and Relay Considerations
- 2.1.9 Location Criteria
- 2.2 Standard Repeater Installation
- 2.2.1 Overview
- 2.2.2 Unpacking and Accessories
- 2.2.3 Rack Mount Installation
- 2.2.4 Wall Mount Installation
- 2.2.5 Grounding
- 2.2.6 Optic Fibre Connection
- 2.2.7 Service Antenna Connections
- 2.2.8 Power Connections and Power On
- 2.2.9 Optional - External Alarm and Relay Connections
- 2.2.10 Closing and Securing the Repeater
- 2.3 Repeater with Fan Hood Installation
- 2.4 Five-Band System Installation
- 2.1 Requirements
- 3 OPENING A SESSION AND NAVIGATING GUI
- 4 MBF-40 COMMISSIONING
- 5 MBF-40 FULL GUI DESCRIPTION
- 6 MONITORING AND FAULT SOURCING
MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | 2-29
2.3 Repeater with Fan Hood Installation
Some r
epeater models with power consumption exceeding 400W are supplied with a fan-hood
assembly kit. This section describes the bracket and fan assemblies for the relevant repeater
models.
WARNINGS!!!
• The fan modules can only be assembled on the appropriate repeater models.
• This installation requires two people.
2.3.1 Assembly Overview and Dimensions
2.3.1.1 View of the Assembled System
The following figure shows the assembled system. It includes the mounting brackets and two fan
assembly units. The
dimensions
,
parts list
and
assembly instructions
are provided in the following
sections.
Figure 2-38: MBF-40 including Fan Hood
2x Mounting
Brackets (one on
each side)
Rear Fan
Hood
Front Fan Hood
Fan Hood Power
Interfaces (2)