User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | 2-19
2.2.5 Grounding
WARNING!!!
• Do not use the repeater grounding bolt to connect external devices.
• For Dual Unit assemblies (five frequency band support), ground both units.
To ground the repeater
• Refer to the grounding requirements described in section 2.1.4.
• Connect the grounding protection to the repeaters ground lug.
Figure 2-16: Grounding the MBF-40
2.2.6 Optic Fibre Connection
Refer to the Fibre Optic installation guidelines described in Appendix C., This product is equipped
with Class 1 Lasers, as per definition in EN 60825-1.
CAUTION!!!
Un-terminated optical receptacles may emit laser radiation.
Do not stare into beam or view with optical instruments.
WARNINGS!!
Maximum input power should not exceed (zero) 0 dBm
Clean the Fibre connectors (receptacles and cables) before connecting. See
Appendix C – F/O Cleaning Procedure for details on F/O cleaning procedures.