User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | 2-13
2.2.4 Wall Mount Installation
IMPORTANT!!
• The repeater mounting procedure is for concrete or brick walls only.
• The weight of the unit requires that two people mount the unit on the wall.
• The signal booster must always be installed vertically with the connectors on
the underside for protection.
Horizontal installation on a bench for long time
may cause damage to the signal booster due to over-heating.
2.2.4.1 Wall Mount Bracket Assembly
NOTE: In addition to the mounting brackets, it is recommended to use additional fixings as described
in section 2.2.4.4.
To assemble the brackets
1. Determine the location of the Repeater on the wall according section 2.1.9.
2. Assemble the brackets to the Repeater using the supplied 4 x M8 bolts and Spring Washers as
shown in the following figure.
Figure 2-7. Position of Brackets for Wall mount
X4 M8 bolts
X4 M8 spring washers
4 M8 bolts
X4 M8 spring washers