User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page | 2-11
2.2.2 Unpacking and Accessories
Upon receiving the MBF-40 Repeater perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the equipment (listed below) is included. Otherwise contact Cobham Wireless.
The MBF-40 Repeater is shipped with the following equipment:
Accessories Package Contents
X1 CD For OMU II and MBF Variants EMEA/Americas
Contains User’s Manual and USB driver
X1 Quick Installation Guide Power Terminal wiring instructions
X2 Mounting Brackets Identical brackets -
used for
wall mount and for rackmount
Bracket to repeater assembly
items:
X4 M8 Bolts
X4 M8 Springs Washers
Drill Template Used for drilling holes in wall
Additional items attached to
enclosure:
Enclosure key
Allen Hex key
2.2.3 Rack Mount Installation
The supplied brackets are used to mount the repeater either on a wall or in a 19” rack. The same
brackets are used for both medium and high-power repeaters.
For high-power repeaters with a fan-
hood assembly, the fan-hood assembly instructions are given in section
2.3.
IMPORTANT!!
• The weight of the unit requires that two people mount the unit onto the rack.
• The signal booster must always be installed vertically with the connectors on the
underside for protection.
Horizontal installation on a bench for long time may cause
damage to the signal booster due to over-heating.