User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless
Page | 1-6
Date: 14-Feb-16
Rev. 4.3
Cobham Wireless – Coverage
Document number: 00071UM
1.7 MBF-40 Basic Interfaces
NOTE: This section describes the interfaces for MBF-40 models supporting up to four services and
whose power consumption does not exceed 400W. MBF-40 models, supporting five services and with
power consumption exceeding 400W are described in the relevant sections in chapter
2.
The MBF unit provides several types of interfaces:
• Lock and screws for protection and security
• External service antenna and GND connections
• Internal connections for power, Fibre optics and alarm cables routed via openings in the chassis
• Internal USB and Ethernet connections for local setup via Web GUI
1.7.1 Securing the Unit
The repeaters are secured with two hex screws (M8) and can also be locked with a key.
NOTE: The two screws must be fully tightened. Failure to do so may affect the IP65 compliancy and
therefore any warranty.
Figure 1-5: Securing Single/Dual Band
Figure 1-6: Securing Tri/Quad Band
Screws
Lock
Screws
Lock