User's Manual

MBF-40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 14-Feb-16 www.cobham.com/wireless
Document number: 00071UM Rev. 4.3
Page |C- 3
4. With the cleaning-head end fully
engaged in the connector, push until
an audible “click” is heard
5. Without fully withdrawing the
cleaning head end push it in again
twice more, each time until an
audible “click” is heard.
6. Withdraw the “One Click” cleaner
and replace the protective end cap.
7. Inspect the Fibre connector using a Fibrescope. On the PC monitor, verify that there is no
contamination present on the connector end-face.
8. If the connector is dirty, clean it with a wet cleaning technique followed immediately by dry
cleaning. This is to remove any remaining residue from the wet clean (the following steps
demonstrate a wet cleaning technique).